PDA

View Full Version : GC3 Firmware 3.02 NOW Available



admin
04-01-2017, 12:02 PM
Instructions
1. Download the firmware update file.
2 .Save the firmware file to the root directory of a USB flash drive.
Note: The USB flash drive must have only one partition

3. Plug the USB flash drive into the USB port on the top of the GC3 panel.
4. You will see a notice that there is a new firmware to install. Select Update
5. Enter the Installer code or Master code.
6. The GC3 will install the update and restart

Firmware Download (V3.0.2) (http://2gig.com/dealers/wp-content/themes/Avada-Child-Dealer/images/firmware-update-tool/gc3-3.0.2.5036-update-prod.2gig)


*YOU CAN NOW CONECT TO WIFI BUT 2GIG HAS NOT RELEASED ANY DETAIL YET........WILL UPDATE THIS THREAD AS SOON AS MORE INFORMATION COMES OUT

System Requirements
PC running Windows XP or later (Mac OS not supported)
One available USB port (USB v1.1 or later)
A working knowledge of installing drivers and running applications on a Windows computer

ABBplanner
06-16-2017, 06:31 PM
I just had a GC3 installed by my local security company.

Installer had a problem with cell not communicating properly and a 2GIG tech guy recommended updating the firmware.

Other than the steps mentioned above, is there anything else I need to do? I got the firmware already loaded on a usb stick.

Current firmware I see if 3.0.0